The difference between hot-dip galvanized and cold-dip galvanized chain link fence

Chain link fence is the inner network of the slope protection net. Whether it is active slope protection net or passive slope protection net, chain link fence is required as the inner network. Because the outer net of the slope protection net is relatively large, it is mainly used to carry larger stones and the inner network. The hook net mainly bears the impact of smaller stones. Galvanized chain link fence mainly adopts the special effect of air permeability of chain link fence, which is widely used in mountain protection, used to fix rocks, and sprayed with green grass seeds to achieve the effect of self-curing in the later stage. It is a perfect combination of greening and protection. The stainless steel chain link fence uses this feature to implement the coating process. The uniformity of the powder fluidization state in the fluidized bed is the key to ensuring the uniformity of the coating film. The fluidized bed used in powder coating belongs to “vertical fluidization”. The fluidization number must be found through experiments. Generally, it can be coated. The suspension rate of the powder in the fluidized bed can reach up to 30-50 %.

Good raw materials and low-quality raw materials are also very different. Why some manufacturers can lower the price of the same specifications? I think it is the reason for the raw materials. In order to make money, some manufacturers choose products that basically have the same appearance as the good materials. The customer checks and pays for the goods at the time of delivery. After the sale, this is an unethical behavior, and the product should be the same as its own child. We can’t just make money. We sell products, that is, sales conscience. We must be responsible to customers. We must choose good raw materials to produce the most qualified products.

wire fence

The last is service. Customers buy products, including services. Sometimes the price may be slightly more expensive than others, but customers who have good service will choose our products. In addition to our good product quality, some customers pay more attention to good service. The product guarantee we must have! After three years of quality tracking and sales, we are correct and timely when there are problems, not only helping customers serve, but also helping us grow!

Cold galvanizing is a physical treatment, just brushing a layer of zinc on the surface, so the zinc layer is easy to fall off. Hot-dip galvanizing is often used in building construction. Continuous hot-dip galvanizing process: steel → heating → cooling to galvanizing temperature → galvanizing → cooling. Cold galvanizing, also called electro-galvanizing, is only 10-50g/m2, and its corrosion resistance is much different than that of hot-dip galvanizing. The price of electro-galvanized chain link fence is relatively cheaper. Hot-dip galvanizing means that the steel body is galvanized on the surface under the condition of hot dipping. It has strong adhesion and is not easy to fall off. Although the hot-dip galvanized pipe also appears rust, it can meet the requirements of technology and hygiene in a long period of time. Claim.

 

First of all, the difference of hot-dip galvanizing is that after degreasing, pickling, dipping, drying, soaking in the dissolved zinc solution, and then lifting. Cold galvanizing, also known as galvanizing, refers to the use of electrolysis equipment to remove oil, pickling into the zinc salt solution, and connect the negative electrode of the electrolysis equipment; connect the zinc plate to the positive electrode of the electrolysis equipment relative to the workpiece, turn on the power, and use The current moves from the positive electrode to the negative electrode, depositing the zinc layer on the workpiece. Explain the difference between hot-dip galvanizing process and cold galvanizing process!

hot dipped galvanzied chain link fence

Chain link fence is the inner network of the slope protection net. Whether it is active slope protection net or passive slope protection net, chain link fence is required as the inner network. Because the outer net of the slope protection net is relatively large, it is mainly used to carry larger stones and the inner network. The hook net mainly bears the impact of smaller stones. Galvanized chain link fence mainly adopts the special effect of air permeability of chain link fence, which is widely used in mountain protection, used to fix rocks, and sprayed with green grass seeds to achieve the effect of self-curing in the later stage. It is a perfect combination of greening and protection. The stainless steel chain link fence uses this feature to implement the coating process. The uniformity of the powder fluidization state in the fluidized bed is the key to ensuring the uniformity of the coating film. The fluidized bed used in powder coating belongs to “vertical fluidization”. The fluidization number must be found through experiments. Generally, it can be coated. The suspension rate of the powder in the fluidized bed can reach up to 30-50 %.

Good raw materials and low-quality raw materials are also very different. Why some manufacturers can lower the price of the same specifications? I think it is the reason for the raw materials. In order to make money, some manufacturers choose products that basically have the same appearance as the good materials. The customer checks and pays for the goods at the time of delivery. After the sale, this is an unethical behavior, and the product should be the same as its own child. We can’t just make money. We sell products, that is, sales conscience. We must be responsible to customers. We must choose good raw materials to produce the most qualified products.

The last is service. Customers buy products, including services. Sometimes the price may be slightly more expensive than others, but customers who have good service will choose our products. In addition to our good product quality, some customers pay more attention to good service. The product guarantee we must have! After three years of quality tracking and sales, we are correct and timely when there are problems, not only helping customers serve, but also helping us grow!

Cold galvanizing is a physical treatment, just brushing a layer of zinc on the surface, so the zinc layer is easy to fall off. Hot-dip galvanizing is often used in building construction. Continuous hot-dip galvanizing process: steel heating cooling to galvanizing temperature galvanizing cooling. Cold galvanizing, also called electro-galvanizing, is only 10-50g/m2, and its corrosion resistance is much different than that of hot-dip galvanizing. The price of electro-galvanized chain link fence is relatively cheaper. Hot-dip galvanizing means that the steel body is galvanized on the surface under the condition of hot dipping. It has strong adhesion and is not easy to fall off. Although the hot-dip galvanized pipe also appears rust, it can meet the requirements of technology and hygiene in a long period of time. Claim.

First of all, the difference of hot-dip galvanizing is that after degreasing, pickling, dipping, drying, soaking in the dissolved zinc solution, and then lifting. Cold galvanizing, also known as galvanizing, refers to the use of electrolysis equipment to remove oil, pickling into the zinc salt solution, and connect the negative electrode of the electrolysis equipment; connect the zinc plate to the positive electrode of the electrolysis equipment relative to the workpiece, turn on the power, and use The current moves from the positive electrode to the negative electrode, depositing the zinc layer on the workpiece. Explain the difference between hot-dip galvanizing process and cold galvanizing process!


Post time: Nov-16-2020

Send your message to us:

Write your message here and send it to us