Precautions for installing zinc steel fence

Zinc steel fence  can often be seen in daily life. Zinc steel fences can be used on roads and decorations. In the process of use, zinc steel fences have more advantages. In the installation of zinc steel fences What should you pay attention to when you are online? The diagonal error of the frame fan is too large, far exceeding the allowable error, which is mainly caused by the error caused by blanking or welding.

In this case, the artificial adjustment effect is not large, and the pvc fence needs to be cut and redone. The mechanical properties of zinc steel guardrails are not up to the requirements of windows. Doors and windows are simply displayed after using defective hardware. When the zinc steel guardrails are installed, the window frame is skewed. The reason is that the line drop and the ruler are not used during installation. Check the verticality of the window, the mistakes caused by this carelessness must be avoided.

rod top fence(4)

The zinc steel fence can be adjusted by adjusting the hexagon socket screws on the outside under the bearing support and the hexagon socket screws on the side of the diagonal rod to achieve the purpose of proofreading. The appearance of the zinc steel fence net should be bright, burrs, welding slag and significant hammer Appearance defects such as marks cannot be presented. Zinc steel fence netting is exposed to the wind and sun in daily life, which will affect the appearance and affect the beauty. So how to maintain the zinc steel fence netting in daily life?

Avoid direct sunlight: Avoid direct sunlight, and scrub with engine oil regularly. Clean and remove dust: Use a cotton rag to scrub well. The depressions and reliefs should be cleaned with a brush. Keep away from acid and alkali. If acid is accidentally stuck on the fence, it should be cleaned with clean water and then wiped dry with a cotton cloth.


Post time: Oct-23-2020

Send your message to us:

Write your message here and send it to us