1. Observation of the site of the cattle fence
Before installing the cattle fence, you must first observe the site to see if the 8-meter-wide area on the border of the cattle fence Net can be leveled. If there is any obstruction, first remove it. The position of the gate of the cattle fence Net fence should be selected in the direction of the road.
2. Columns of cattle fence Device
Install corner posts at the corners and corners of the cattle fence installation position, and install a cattle fence Net central post every 400 meters from the corner posts along the installation road. Install a bullpen net post every 14 meters, which must be straight, strong and in line. The entry depth is 0.7 meters for corner pillars, gate pillars, and backbone pillars, and 0.5 meters for the small pillars of the bullpen net, with supporting rods installed.
3. Install Grassland fence
Open the bullpen net in one direction from the corner post of the bullpen net. The side with the smallest weft distance is on the ground. The joints of the two rolls of grassland net fence and bullpen net fence are knotted. Cut one end of the net fence and tie it separately. Then use a tensioner to clamp each weft at the other end with a chuck, and fix it on the center post of the bullpen, and tighten it every 200 meters. When tightening, each weft must be evenly tightened. In the local area far away from the end, investigate the prairie net fence and cattle fence net fence and the ripples on the plane can be stable. In the process of tightening, swing the prairie net fence and the bullpen net fence to prevent entanglement by other things, so that the force is even, and then cut the other end to tie it to the center post. Use a tie hook to tie the prairie net fence and the bullpen net “one weft wire and tie one weft wire” to the small posts. The two adjacent small posts should be staggered and tied. Use the hook to connect the barbed wire and the grassland net fence. For cattle pen net fences, at least two hooks are used between every two small posts, and so on.
Fourth, the installation of the fence gate of the cattle pen net:
The door is fixed on the doorpost with door lugs to ensure that the door is installed straight and convenient to open and close.
5. The final inspection of the cattle fence:
After the grassland net fence device is finished, it is necessary to do a final inspection to ensure that all knots are correct, the wire ends are trimmed neatly, and the knot orientation is correct.
Post time: Jan-22-2021